A straight finish nailer, on the other hand, is best suited for small projects. In fact, the thinner nails of a straight finish nailer can shoot deep into a block of wood without damaging its grain. Compared to a straight finish nailer, an angled finish nailer has lighter weight. For this reason, the angled finish nailer is easier to use and carry.
Aside from that, you can also use the angled version at elevated areas without too much strain and effort. A straight finish nailer, on the other hand, is bulkier. For this reason, it is cumbersome to carry around. When it comes to firing nails at an angle, an angled finish nailer is a better tool. To explain further, this tool has an angled driver that allows it to shoot nails at an angle. As for a straight finish nailer, you can also use it to fire nails at an angle.
However, you need to tilt the tip of the tool. Unfortunately, the nails can miss their target, which may result in unwanted accidents. In terms of price, an angled finish nailer is more expensive than a straight finish nailer. The reason is that the angled finish nailer is more functional than its straight counterpart. The same goes with the nails. A gauge nail is more expensive than a gauge nail. After knowing the difference between an angled finish nailer and a straight finish nailer, we can conclude that an angled finish nailer is better than its straight counterpart.
Even so, you have to remember that the type of electric nail gun that you will use will depend on your project. For example, if you need to reach tight spaces, then an angled finish nailer is recommended. Related Articles. Meanwhile, straight nailers have straight magazines. The difference seems pretty straightforward, but it can eventually lead to major differences in terms of functionality and suitability for your project.
As mentioned, angled nailers feature magazines at a slight angle — this can sometimes be modified depending on the exact nailer in question. The magazine goes back toward your arm, which allows you to drive nails into corners.
Nailers have different nail capacities or suitable gauges. Larger gauges translate to thinner nails. For instance, an gauge nail is thinner than a gauge nail. Angled finish nailers can usually hold larger nails thanks to the longer size of their magazines. They can often go as low as gauge nails, enabling them to work well for heavier construction work.
These tools are a great fit for cabinet or other furniture creation or repair. This is also important since thicker nails often work better to hold corner pieces together. Angled nailers are usually made with less material — this often means that they are also lighter in overall weight as well. However, this may not always be true if the magazine for a given nailer is full thicker nails obviously weigh more.
Angled nailers do have a downside in that they tend to be more expensive than straight finish nailers. This for both the overall unit and the nails that go into the gun. Thicker nails are usually more expensive. Pros More adaptable to different spaces Can be used in cramped environments Works well for corner nailing Lighter and more portable Cons A little pricier overall.
A straight finish nailer can also be an effective tool. Paslode developed the first ever cordless gas nailer, combining a battery and fuel cell. This innovative design offers true portability and eliminates the need for compressors and air lines. So, without compressed air, how do they work? A spark, created by the battery, ignites a measured dose of gas from the fuel cell causing a tiny explosion. It is the subsequent expanding gas from this ignition that pushes a piston, which in turn, drives the nail.
Effectively, what Paslode had succeeded in doing, was to place a small internal combustion engine — just like the one in your car, inside a power tool casing. Currently, the combustion engine is the most widely used power-generating device in existence and it has certainly proved its reliability throughout the range of Paslode impulse gas tools. As an approved service agent for Paslode tools, our Service Centre manager has this to say:. The straight nailer we are referring to is a second fix Paslode IM65 , which is used to a ttach decorative trim and fixtures such as architrave and skirtings.
Because this tool is not used for structural timber applications , such as studwork , joists, and roof trusses — the job of a first fix nailer — the second fix nails use a finer gauge wire. The thinner, gauge brad nails provide a strong enough fix for the intended purpose, leav ing a discreet, small hole , which can easily be filled and decorated. It is classed as a straight nailer as the magazine that holds the nails is situated at 90 — degrees to th e drive assembly , which contains the driver blade that hits the end of the nail.
Top tip — Y ou will need to use an adaptor plate to fire 19mm and 25mm nails , which you will find in the box of your new machine. The straight Paslode IM65 is compatible with the following nail and fuel packs. The IM65A angled nailer, is virtually identical to the straight machine, except the magazine is offset by 20 degrees. It takes the same gauge wire nails, but they too are also set at a degree angle.
Being able to tilt the front of the machine backwards prevents the front of the tool from hitting the workpiece, so it allows nails to be fired into tight corners or close to the floor. This would be impossible if you were using a straight nailer, and it is in these applications where an angled nailer is invaluable.
The angled Paslode IM65A is compatible with the following nail and fuel packs. If the nature of your work means you regularly find yourself having to fix into corners and tight spaces, then it is worth considering the angled 2 nd fix nailer over the straight machine.
0コメント